Support Email:
[email protected]
$695.00
Brand New Holden RG Colorado BCM — outright replacement for the 2012–2020 Holden RG Colorado. Pre-programmed to your supplied VIN, ready to fit.
Genuine Holden BCMs cost $1,000+ through a dealer plus install and programming. Our pre-programmed BCM gets your Colorado back on the road for a fraction of the price.
Two programming options at checkout: Clone (ship in your old BCM, we make it plug-and-play) or Calibrations Only (cheaper / faster but needs a Holden Service Outlet to security link once fitted).
Same / next business day programming turnaround. Match your service number at the variation selector before ordering.
A brand new RG Colorado BCM, pre-programmed to your VIN before it ships. Suits all 2012–2020 Holden RG Colorado utes. 12-month warranty included.
The Body Control Module (BCM) on Holden RG Colorado utes is one of the most common modules we see fail. When it goes, you typically lose control of locking, lighting, keys and sometimes the ability to start the truck altogether. The usual giveaway is no communication with the module when scanned, or the BCM no longer driving its outputs.
A genuine BCM from Holden runs $1,000+ before you add fitment and programming on top. This listing gets you a brand new BCM, pre-programmed to your VIN and ready to drop in — at a fraction of the price.
Choose your programming option at checkout based on whether your original BCM is still communicating (Clone — comes back plug-and-play) or whether it’s already dead (Calibrations Only — needs a Holden Service Outlet to security link and reprogram keys once fitted).
These are the most common symptoms we see from a failed RG Colorado BCM. If your ute is doing one or more of these, the BCM is a strong suspect:
The service number is printed on a label on the back of the BCM after “Serv #”. Match yours to one of the four year groups below, then pick the matching variation at checkout so we ship a compatible unit:
Every BCM ships pre-programmed with your VIN and factory calibrations. The programming option you choose determines how the security & key data gets linked so the truck will actually start and run.
Send us your original BCM along with the order. We copy your existing security data and key information across to the new module and program it to suit your vehicle.
The replacement comes back plug-and-play — drop it in, start the truck, drive away. No workshop visit, no key reprogramming.
Best when your original BCM is still readable.
We program the correct calibrations to suit your vehicle. The BCM ships ready to bolt in but the truck will not start until it’s been security linked.
A Holden Service Outlet will need to perform the security link and reprogram the keys once the BCM is fitted.
For when the original BCM is completely dead and can’t be cloned from.
Works on all Holden RG Colorado utes (2012–2020) when matched to the correct service-number variation:
Service Number Variation — pick the year-group matching your existing BCM (see the service number table above).
VIN — 17 characters. Used to load the correct calibrations into the BCM before shipping.
Programming Option — choose Clone (ship in your old BCM for a plug-and-play return) or Calibrations Only (cheaper but needs Holden Service to security link once fitted).
Brand new BCM at a fraction of dealer price — programmed, packed and on its way same / next business day.
| Weight | 0.5 kg |
|---|---|
| Dimensions | 15 × 10 × 5 cm |
| Service Number | 13583450 / 13586278 / 13501739 / 13534181, 13592377 / 13590852 / 13593776 / 13596994 / 13580698 / 13594564 / 13534184, 13510536 / 13594614 / 13534187, 13526399 / 13519643 / 13534189 |
English
