Support Email:
[email protected]
$350.00
DIY CG2 Captiva EBCM (ABS) Programming Service — security link a replacement Electronic Brake Control Module to your VIN, configure setup for your build, recalibrate the steering angle sensor, and push the latest GM calibration updates.
Kit ships with an OBDSync scantool and 4-token redemption serial. Programmed in your driveway over OBD-II.
For all CG2 Captiva drivetrains (2011–2018) — covers ABS, traction control and electronic stability systems.
Security link a replacement Electronic Brake Control Module to your VIN, configure setup for your build, recalibrate the steering angle sensor, and push the latest GM calibration updates. DIY kit ships with an OBDSync scantool and a 4-token redemption serial.
The EBCM controls ABS, traction control and stability. After replacement and security linking, a proper brake bleed procedure through the new module is required before driving. Reference the workshop manual or have it performed by a qualified technician.
The Electronic Brake Control Module (EBCM) on your CG2 Captiva is the ABS hydraulic control unit + brain combined — it drives ABS, traction control, electronic stability control and hill descent. When replaced, the new unit needs to be security linked to your VIN, configured for your build, and have the steering angle sensor relearned before the brake systems will operate.
All programming is done in the vehicle via OBD-II using OBDSync on a Windows laptop — no need to remove or ship the EBCM.
Provide your VIN at checkout. We ship the OBDSync scantool with a printed 4-token redemption serial.
Download & install OBDSync (Windows 10 / 11, 64-bit). Sign in and enter your redemption serial to add the 4 tokens.
Plug the scantool into your Captiva’s OBD-II port, select EBCM options in OBDSync, work completed in minutes.
Watch the full OBDSync DIY walkthrough for the CG2 Captiva Electronic Brake Control Module (EBCM) — security linking a replacement EBCM, configuring setup, recalibrating the steering angle sensor, and flashing the latest calibrations, step by step.
Works on all Holden CG2 Captiva (2011–2018) drivetrains:
OBDSync runs on Windows 10 or 11 (64-bit only).
VIN required at checkout. Scantool and printed redemption serial dispatched once the order is processed.
DIY kit only — pair in a replacement EBCM, configure for your build, calibrate the SAS from your driveway.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 15 × 10 × 5 cm |
English
