Support Email:
[email protected]
$250.00
DIY CG2 Captiva RDM Programming Service — security link a replacement Rear Drive Module on AWD models to your VIN and push the latest factory calibration updates.
Kit ships with an OBDSync scantool and 2-token redemption serial — RDM job uses 1 token, 1 spare. Programmed in your driveway over OBD-II.
For AWD CG2 Captiva models only (2011–2018). The RDM drives the rear differential clutch engagement on the AWD system.
Security link a replacement Rear Drive Module to your VIN and push the latest GM calibration updates. DIY kit ships with an OBDSync scantool and a 2-token redemption serial — the RDM job uses 1 token, so you’ll have 1 spare for another module.
FWD-only CG2 Captivas don’t have an RDM. This listing only applies to AWD models with the active rear differential clutch system.
The RDM job uses 1 token. The kit ships with a 2-token serial as standard, so you’ll have 1 spare token on your account for any other supported Captiva module job in the future.
The Rear Drive Module (RDM) on your AWD CG2 Captiva drives the electromagnetic clutch that engages the rear differential when AWD is needed. Without the RDM working, the car defaults to FWD only and the AWD warning will light on the cluster. When the RDM is replaced, the new unit needs to be security linked to your VIN and loaded with the correct factory calibrations before AWD will engage.
All programming is done in the vehicle via OBD-II using OBDSync on a Windows laptop — no need to remove or ship the RDM.
Provide your VIN at checkout. We ship the OBDSync scantool with a printed 2-token redemption serial.
Download & install OBDSync (Windows 10 / 11, 64-bit). Sign in and enter your redemption serial to add the 2 tokens.
Plug the scantool into your Captiva’s OBD-II port, select RDM options in OBDSync, work completed in minutes.
Watch the full OBDSync DIY walkthrough for the CG2 Captiva Rear Drive Module (RDM) — security linking a replacement RDM on AWD models and flashing the latest factory calibrations, step by step.
Works on all AWD CG2 Captiva models (2011–2018) with the factory active rear differential clutch.
OBDSync runs on Windows 10 or 11 (64-bit only).
VIN required at checkout. Scantool and printed redemption serial dispatched once the order is processed.
DIY kit only — pair in a replacement RDM and restore AWD function from your driveway.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 15 × 10 × 5 cm |
English
