Support Email:
[email protected]
$250.00
DIY VF Side Object Module Left (SOML) Programming Service — security link a replacement left-side Side Blind Zone Alert sensor module to your VIN and push factory calibration updates.
Kit ships with an OBDSync scantool and 2-token redemption serial. Programmed in your driveway over OBD-II.
For the LEFT-side SBZA module on VF Commodore & HSV Gen-F vehicles factory-fitted with Side Blind Zone Alert (2013–2017).
Security link a replacement left-side Side Blind Zone Alert (SBZA) sensor module to your VIN and push the latest GM calibration updates. DIY kit ships with an OBDSync scantool and a 2-token redemption serial — programmed in your driveway over OBD-II.
The left and right Side Object Modules are separate units with their own VIN security link. If you’ve replaced both, you’ll need this kit plus our VF Side Object Module Right (SOMR) kit.
The Side Object Module Left (SOML) on your VF Commodore or HSV Gen-F is the rear-facing radar sensor mounted in the left (passenger-side) rear quarter that drives the Side Blind Zone Alert / Lane Change Alert system. When the SOML is replaced — commonly after a rear quarter panel repair or a known fault — it needs to be security linked to your VIN and loaded with the correct factory calibrations to operate.
All programming is done in the vehicle via OBD-II using OBDSync on a Windows laptop — no need to remove or ship the SOML.
Provide your VIN at checkout. We ship the OBDSync scantool with a printed 2-token redemption serial.
Download & install OBDSync (Windows 10 / 11, 64-bit). Sign in and enter your redemption serial to add the 2 tokens.
Plug the scantool into your VF’s OBD-II port, select SOML options in OBDSync, work completed in minutes.
Watch the full OBDSync DIY walkthrough for the VF Side Object Modules — security linking a replacement SBZA sensor and flashing the latest factory calibrations, step by step. The same procedure applies to both the left (SOML) and right (SOMR) units.
Works on all Holden VF Commodore and HSV Gen-F vehicles (2013–2017) factory-fitted with Side Blind Zone Alert (SBZA / SBSA):
OBDSync runs on Windows 10 or 11 (64-bit only). A laptop is recommended so you can sit in the car with the scantool plugged in.
VIN required at checkout. Scantool and printed redemption serial dispatched once the order is processed.
DIY kit only — pair in a replacement left-side SBZA sensor and push the latest calibrations from your driveway.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 15 × 10 × 5 cm |
English
