Support Email:
[email protected]
Search
$250.00
Program your Holden VE / WM Commodore HVAC climate control module at home — set the single / dual-zone configuration or run the actuator learn. DIY OBDSync kit — includes the scantool plus 2 tokens.
The same kit also programs dozens of other VE / WM modules (BCM, ECM, TCM, ABS, radio and more) — each is licensed separately and may need one or more tokens, at $50 per token.
Configure your VE / WM Commodore HVAC climate control module for single or dual-zone operation, or run the actuator learn to recalibrate the air-blend and mode doors. We ship you an OBDSync scantool plus 2 tokens so you can complete the programming yourself — and unlock dozens of other VE / WM module functions too — from home.
The HVAC module runs your climate control system — fan speed, temperature blend and air distribution. Its Zone Type configuration sets whether the car operates single-zone or dual-zone climate control, while the Actuator Learn recalibrates the internal air-blend and mode-door actuators so the system reads their positions correctly and moves them accurately.
This is a DIY kit. We ship you an OBDSync scantool plus the tokens needed to license the module — you run the programming yourself at home using a Windows laptop, and the module never has to leave your vehicle. It’s ideal after fitting a replacement HVAC unit, converting between single and dual zone, or resolving actuator faults.
Same kit, more capability: the OBDSync software also programs the BCM, ECM, TCM, ABS/EBCM, radio and many other VE / WM modules. Each additional module is licensed separately with its own tokens, and some modules need more than one token (tokens are $50 each), so once you’ve got the kit you can take care of future programming any time — just add the tokens you need.
This kit unlocks the full set of HVAC functions available through OBDSync for your VE / WM Commodore:
Suits all VE Commodore (Series 1 & 2) and WM Statesman / Caprice models, plus HSV E-Series, built 2007–2012:
We post you the OBDSync scantool along with the tokens needed to license your HVAC module. Plug it into your car’s OBD-II port, connect to a Windows laptop, and follow the on-screen prompts.
The hardware that connects to your car’s OBD-II port and talks to your laptop. Yours to keep for future diagnostic and programming work.
Universal OBDSync tokens used to license your module. The HVAC module needs just 1 token — the spare can be used on another module. Other modules may need more than one; additional tokens are $50 each.
You will need a laptop running 64-bit Windows 10 or 11 to run the OBDSync software. The software does not run on macOS, Linux, ChromeOS or mobile devices.
When you add this product to your cart you’ll be asked to enter your vehicle’s 17-character VIN. We’ll contact you after your order if there are any other questions.
This listing is for the DIY programming kit only — no HVAC module is supplied.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 15 × 10 × 5 cm |
